Cirbell controls

Technical Information

THREE IN-LINE VALVES: Controls water flow for 3 sprinkler lines.
QUICK SETUP: Easily installs in just minutes.
NO TOOLS REQUIRED: Hand tighten installation is all you need.
MULTI-SYSTEM: Works with PVC and poly pipe systems; adapters for 3/4-inch and 1-inch PVC pipe included.
COMPATIBLE DESIGN: Works with most existing sprinkler systems

Technical Information

Power supply: 2 1.5V dry batteries
Color: green
Material: ABS
Working water pressure: 1-5kg
Work flow: 456-1432L/h
Rated power consumption: Less than 1W
Quiescent current: 5uA
Working temperature: 0-60°C
Example: Set watering for 5 minutes every hour.
2. Reselect frequency:
When I want to change the frequency, I first select the time and then the frequency gear. Every time I change the frequency gear, the internal timing will be reset. 3. Temporary irrigation:
Turn the left frequency gear dial to "Reset", turn the right dial to "On" to water, and turn to "Off" to turn off.
4. Program protection:
The time interval must be greater than the watering time, otherwise the machine will not start watering when the time is up, and this function will also stop when watering. For example: if the frequency is 1 hour and the watering time is 90 minutes, no water will be produced if the setting is unsuccessful. If you start to choose 1 hour and 1 minute watering, when it is watering, when the watering time is set to 90 minutes, the watering will stop immediately and the setting is unsuccessful.

Package Contents:1 x Irrigation timer

Technical Information

Model: 2W-15, 2W-20,2W-25

Pipe size:1/2”, 3/4”, 1”

Thread: BSP

Media: water

Type:
Normally closed (closed when de-energizes, open when energized)

Working pressure : 1.03-10.04bar for water,

Operating: Pilot

Voltage: AC220V/AC24V/DC24V/DC12V /DC Latching

Materail: Nylon

Seal: NBR (Medium temperature: -5-80 Degree Centigrade)